PCL230

Another great tool from A1 with composite body handle.

• Ideal as a truck workshop tool
• 3/4 inch sq drive
• Composite body.
• Maximum torque of 1200 ft.-lbs.
• Features the well tried IR twin hammer mechanism
• With composite body handle
• Is a looker
• Performs to match its appearance

DMS 01

This is a race pit tool as used in many racing series...
It is fast in operation and can be used for speedy wheel removal..
Made up in house and modified to suit your requirements....

• this tool often operates at 300 PSI in the pit area, off nitrogen bottles.
• it has a twin dog hammer mechanism.
• power is in excess of 400 ft lbs in 2 seconds,
• max torque depends upon air pressure estimate 800ftlbs
• exhausts through the top of the tool and handle base
• robust construction..good workshop tool as well as Pit tool

PCLA158

(similar to Ingersoll Rand 261 model Tyre Shop use)

Applications:
This compact size, high powered impact wrench is ideal for any task from spring work to pinion nut and truck pad removal to major engine teardowns.

• Model No. SP-1158
• SQ.Drive in(mm) 3/4 (19)
• Bolt Capacity in(mm) 1 (25)
• Working Torque Range
  ft-lbs(NM) 200-660 (270-900)
• Max Torque ft-lbs(NM) 1,100 (1,500)
• Free Speed RPM 5,500
• Overall Length in(mm) 8-3/4 (220)
• Net Weight lbs(Kg) 12 (5.5)
• Air Consumption cfm(m3/min) 3.7 (0.10)
• Air Inlet in-NPTF 3/8
• Min Hose size in(mm) 1/2 (13)

PCL233

Ingersoll Rand redefines the category with the lightest, most compact 3/4" impacts tool in the industry.

• Stronger.
• omposite body.
• Maximum torque of 1200 ft.-lbs.
• The highest power to weight ratio of all 3/4" impacts.
• Lighter: 7 lbs. The IR 2141 weigh less than any competitive 3/4" impact. In fact, its closest competitor weighs 75% more
• Tougher: The patented Twin Hammer PLUS™ mechanism is 30% more durable than other twin hammer mechanisms

PCL234

• Differential regulator allows the operator to match the required power to the job
• Improved oil bath DYNA-PACT clutch delivers higher performance and extended durability
• Handle exhaust directs air away from the workpiece and operator
• Integral 360 degree air inlet swivel keeps air hose from being twisted and kinked
• Teasing throttle design for precise control
• Applications: assembly and maintenance of buses, trucks, RV's, farm machinery and construction equipment
• Ultimate Torque: 1000 ft.-lbs.

Specifications:
Square Drive in.: 3/4
Weight lb.: 10-1/2
Length in.: 9-5/8
Avg. Air Consumption CFM: 8
Air Inlet NPTF in.: 3/8
Working Torque Range ft.-lb: 150-700
Ult. Torque @ 90 PSI Fwd/Rev ft.-lb: 1000

PCL235

Specifications:
Square Drive in.: 3/4
Air Inlet NPTF in.: 3/8
Ult. Torque @ 90 PSI Fwd/Rev ft.-lb: 1000

PCL Services holds spares for this model

PCL236

PCL237

Twin hammer mechanism utilises oversized hammers and specially strengthened hammer cage to pull even more torque out of the precision air motor.

- Precision made components fit closely to reduce air leakage and maximise power.
- Flip reverse control on the rear of the tool with four-position air regulator on the handle base.
- Suitable for heavy tyre shop use.

• Model No:SA604
  
• Drive Size:3/4”Sq Dr
  
• Air Consumption:5.6cfm
  
• Operating Pressure:90psi
  
• Air Inlet Size:1/4”BSP
  
• Weight:4.6kg