PCL211

Applications:
Excellent choice for general duty automotive work

• Model No.A1 . 01
• SQ.Drive in(mm) 1/2
• Torque 405 ftlbs
• Japanese manufactured.
• All steel internals.
• Heavy duty work
• Vvariable speed control
• Small brother to pit race tool.
  
• SQ.Drive in(mm) 1/2 (12.7)
• Bolt Capacity in(mm) 5/8 (16)
• Working Torque Range
  ft-lbs(NM) 35-375 (50-500)
• Max Torque ft-lbs(NM) 410 (550)
• Free Speed RPM 6,000
• Overall Length in(mm) 7-1/4 (185)
• Net Weight lbs(Kg) 5-5/8 (2.6)
• Air Consumption cfm(m3/min) 3.8 (0.11)
• Air Inlet in-NPTF 1/4
• Min Hose size in(mm) 3/8 (10)

PCL213

Applications:
Excellent choice for heavy automotive and truck work such as tire changing, shock and spring work, farm, body shop, and front end work. Ideal anywhere extra powerful tools are needed.

• Model No. SP-1148
• SQ.Drive in(mm) 1/2 (12.7)
• Bolt Capacity in(mm) 5/8 (16)
• Working Torque Range
  ft-lbs(NM) 40-350 (55-475)
• Max Torque ft-lbs(NM) 405 (550)
• Free Speed RPM 6,300
• Overall Length in(mm) 7-5/8 (195)
• Net Weight lbs(Kg) 5-1/2 (2.5)
• Air Consumption cfm(m3/min) 2.9 (0.08)
• Air Inlet in-NPTF 1/4
• Min Hose size in(mm) 3/8 (10)

PCL214

Applications:
This economical 1/2" impact wrench is one of our most popular. ideal for all major automotive service and body shop, farm and light truck work.

• Model No. SP-1145A
• SQ.Drive in(mm) 1/2 (12.7)
• Bolt Capacity in(mm) 5/8 (16)
• Working Torque Range
  ft-lbs(NM) 40-310 (55-420)
• Max Torque ft-lbs(NM) 370 (500)
• Free Speed RPM 6,000
• Overall Length in(mm) 7-1/2 (190)
• Net Weight lbs(Kg) 5-1/2 (2.6)
• Air Consumption cfm(m3/min) 2.8 (0.08)
• Air Inlet in-NPTF 1/4
• Min Hose size in(mm) 3/8 (10)

PCL215

• 1000 FT. LBS. OF NUT-BUSTING TORQUE!
  This wrench weighs less than 4 lbs, yet packs a 7 vane motor that delivers 1000 ft. lbs. of nut-busting torque.
  
• Four-position power selector
  
• Push-button forward/reverse
  
• Professional touch trigger for power modulation
  
• Torque range: 50-600 ft. lbs;
• Max. torque: 625 ft. lbs. (fwd), 700 ft. lbs. (rev) ;
• Nut-busting torque: 1000 ft. lbs. (will loosen a nut tightened to 1000 ft. lbs. in 6 seconds);
• Impact: 1250 BPM;
• Free speed: 9500 RPM;
• Standard bolt capacity: 9/16'';
• Average air consumption: 5 CFM (24 CFM under load);
• 1/2'' anvil;
• Tool weight: 3.95 lbs.

Ingrsoll-Rand# 2135

PCL217

• 10,000 RPM - the fastest IR production gun
• 625 ft.lbs. maximum torque - outperforms the competition
• Black powder coated handle and housing and distinctive yellow protective boot
• As close as you can get to the real thing - looks, feels, sounds like the ThunderGun used by racing teams worldwide.
  

Specifications
Drive: 1/2"
Torque range: 30-400 ft.-lbs.
Max. torque (reverse): 625 ft.-lbs
Free speed: 10,000 RPM
Standard bolt Capacity: 9/16"
Net weight: 5.75 lbs.
Overall length: 7.6"
Average air consumption: 5.4 CFM, @load: 23 CFM
Air inlet: 1/4"

PCL221

• Use this fast wrench when you don't have time to mess around. 625 ft. lbs. of torque out-muscles other 1/2" wrenches. Same design as the guns used by most pit crews.
• Specifications:
  
• Twin-hammer delivers more torque to the anvil, less vibration
  
• Five speed regulator
  
• Forward/reverse
  
• Protective rubber boot

PCL222

PATENTED CP TURBO SYSTEM
At 800 ft. lbs. of ultimate torque, this is the world's most powerful 1/2'' impact wrench.

The highest torque-to-weight ratio of any 1/2'' wrench
Single control dial handles regulator and direction
Lightweight super-tough composite housing
Oil bath clutch for extended life
Patented spring hammer clutch for smoother operation
Handle exhaust
Ultimate torque @ 0-90 PSI: 600/800 ft. lbs;
Working torque: 50-550 ft. lbs;
Air consumption: 5.5 CFM average, 18.1 actual (FWD), 41.1 CFM in Turbo mode (REV);
Impacts: 1580 BPM;
Speeds: two fwd, two rev;
Air inlet: 1/4'' NPTF;
Tool length: 7.6'';
Minimum hose size: 3/8'';
Tool weight: 5 lbs;